VDDRY OFFERS A LARGE VOLUME CLAY ACTIVE DESICCANT PACKAGE

Desiccant Pack Active Clay

Moisturizing Moisture Pack for your home

The use of humectants can affect your health. Using moisture-proof granules to preserve your home as well as objects is the perfect solution.
Accordingly, for clothes, make use of sunny days to expose the outdoors against mold. What other items in the house to prevent moldy? See the small tips below.

I. ANTI-DIRECT INFRARED MEASURES

1. pillows, mosquito nets

With pillow: You should wash the pillow once a week and exposed to dry sun to kill the bacteria, anti-damp. Pillow intestines do not wash regularly so every 10 days you should put them in the sun once. Sunshine not only makes pillow fragrant but also cleans germs, harmful bacteria.
Similarly, with bed linen, bed linen should also be washed regularly and dried in the sun. Note that they should not be washed in bad weather. At the same time you should also vacuum under the bed and turn on the fan to the room is airy.
Doors should also be vacuumed every month and should be open to sunlight, making the air cleaner.

2. Wardrobe closure

Moisturizing odors are most likely to appear in wardrobes along with your clothes. Therefore, in addition to regular cleaning, put less orange or dried peel skin to deodorize this unpleasant smell.

3. Cabinets, shelves, wooden furniture

Cabinets are usually made of moldy materials such as plywood or wood. If for long periods of time in a humid place, it is susceptible to dampness. To overcome this condition you can use sandpaper to clean off the mold, then paint on a coat of 2-3 layers of protective paint on the surface. This coating is very effective against mold.
In addition, you can also use a dehumidifier to dry the furniture in the days, closed doors, open air conditioning for several hours. With wooden cabinets you should use moisture-proof seeds put each package in the cabinet to absorb moisture.
Not only wooden cabinets, even iron cabinets are rusty if placed in a dry air environment. So after wiping the cabinet with a wet towel, dry the towel dry. You should also open the fan to dry the moisture around the objects.

II. ANTI-DETERGENT FOR HOUSEHOLD

1. Sinks

Keep the sink area clean and dry and keep it dry.

2. The bowl

To avoid the smell of mold in the bowl, it is advisable to dry the dishes and dry them as needed before placing them in the compartment.
You should also clean the kitchen cabinets weekly and remember to dry them thoroughly every time you clean. Open the fan to vent and dry the corners of the kitchen.
Electric appliances
On days when electronic devices in homes are also very susceptible to mold. The best way to use the TV, the disc player, the electric stove, the kettle for standby mode will help keep the power running in the machine, which will dry the device. And should be maintained every day to dry the machine.
In addition, you should also restrict placing electronic devices on the floor or wall to wall. Should be placed higher than the ground is 1m, the wall from 10-15cm.

III. ANTI-DRAINAGE FOR THE HOUSE

1. Handling when the ceiling is damp

To prevent moisture in the ceiling you can use the remedies such as adding the roof cover with iron, using tiles on the ceiling. Alternatively, you can also plant a climbing cistern that splashes water onto the ceiling surface where it is exposed to sunlight, to reduce direct sunlight into the wall.
Renovate the drainage system in the house, especially the water pipe directly from the ceiling, balcony before and after each heavy rain. Regular cleaning of sewer pipes on ceilings to remove sewage junk hamper drainage. Water that is suspended for days on the ceiling is also one of the causes of mold for the ceiling.

2. Moisture resistance for the wall

The old paint walls are susceptible to mold attack. For processing you can follow these steps:
- Remove any discolored coatings, use chemical cleansers to remove mold and clean the affected area before applying paint substitute.
- Use mortar to put on cracks and holes in the wall, to create a flat surface you can plaster a special layer of powder outside, to cover the surface is 0.5cm thick. And make sure the surface is clean, dry, humidity below 16%.
- Cover with an alkaline coating, wait for paint to dry, coat 1-2 more waterproof paint on top.

3. How to prevent moisture on the floor

The cause of the wet floor is caused by the difference between the lower substrate temperature and the surface causing the air to condense on the surface of the substrate causing humidity.
To overcome this situation you can put about 10kg of lime in a wooden bucket or carton box in the corner. However, note that the lime should be covered, only when the weather is really wet open the lid.
Quicklime has a desiccant effect in the room, helping the floor dry. In addition, if you do not have lime, you can also use dry charcoal to replace it, putting charcoal in the corner when the floor is sweaty or damp. It also helps to dry the floor. After use, you can dry wood for use in the next time.
In addition, to prevent dampness on the floor before the design needs to pay attention to the principle of anti-condensation floor should choose the thin walling materials: insulating materials, ceramic tiles, wood, ceramic foam or plate. The material must be consistent in order to minimize the accumulation of water on the surface of the floor. Besides, it is possible to combine the use of carpets such as carpet carpets, jute carpets or wool carpet to protect the house.
In addition, on wet days you should clean the house often with a dry towel, close the door, seal the gap, open air conditioning in dry mode and use dehumidifiers to deodorize.

IV. OTHER REMARKS TO AVOID COATING

House degradation can cause the nooks in the house to appear moldy. You should pay attention to repair, help the house is better kept. The following should be checked to ensure that your home is always in the cleanest state.

1. Check the water system

Leaking water often causes mold to appear on walls near these areas. Check it carefully and if necessary, call the repair technician sure enough.

2. Dirt is different from mold

The stains look like stains and if you do not pay much attention, you may look at them without treatment. Now let's have a little work to identify them. Use a swab or dip to dilute with a mild detergent solution and rinse thoroughly. If the stain does not go away, it is a stain and you need to find out the cause.

3. Moisture resistance right from the time of construction

The rate of lime, sand, cement when building if not interested can cause the phenomenon of mold for your home.
When building mortar is more lime they usually make the wall long dry and easily soaked in water when it rains cause moisture. Therefore, when mixing 3: 1 or 4: 1 with sand and cement mixed with diluted lime, not lime, to reduce the amount of lime, to help the house less damp.

Contact Us

Address: VNDRY VIET NAM .Ltd

North:

132/68 Phu Dien str, HN City
Mor: 7.30am - 11.30am.
Aft: 13.00pm - 17.00pm.

094 788 6666

South:

No.71 - 51 str, Tan Quy, 7 War, HCM
Mor: 7.30am - 11.00am.
Aft 13.00pm - 17.00pm.

0913 565 965